Sony STR-DA3000ES Service Manual page 166

STR-DA3000ES
SPECIAL MENU MODE
Procedure:
1. Press the button to turn on the main power, then while pressing the
I/1
2. The message "MENU EXPANDED !" appears.
[MENU]
3. Each time the dial is turned clockwise, the item is switched in order as follows.
4. To release from this mode, while pressing the
5. The message "MENU EXPAND OFF" appears.
Items
Protector on/off
Model version display
Model/distination change
FL display fonts test
FL display test
Audio swap
DSP reset
DSP 1 IRAM
DSP 1 ARAM
DSP 2 IRAM
2
[MEMORY/ENTER]
Display
SPECIAL
PROTECTOR ON/OFF [ XXX ]
SPECIAL
#### **** vX.XX @@@@
SPECIAL
MODEL [ #### ] XX
****
SPECIAL
= [ X ]
FL FONT 0x **
ALL ON
SPECIAL
SWAP [ XXXXXXXXXXX ]
SPECIAL
DSP RESET [ XXX ]
DSP 1 IRAM
I [ ] = XXXX
*****
DSP 1 ARAM
D [ ] = XXXXXXXX
*****
DSP 2 IRAM
I [ ] = XXXX
*****
[MEMORY/ENTER]
button, press the
[MOVIE]
button, press the
Remark
XXX: ON or OFF (switching with
####: model
**** : destination
X.XX: main microprocessor software version
@@@@: Sum value of flash memory in the main microprocessor
####: model, **** : destination, XX: at or fx
[--/+]
(switching with dial)
** : 20 to 1F, X: character (switching with
[DISPLAY]
Each time button to change as follows.
all on t test pattern 1 t test pattern 2 t all off t all on
[--/+]
Switching with dial
XXX: ON or OFF (switching with
Note: Since it continues being reset when "DSP RESET [ON]"
is chosen, be sure to return to "DSP RESET [OFF]"
The umbers which can be changed will blinks
[TUNING +]
To select the digit: Press the
To select the number when the umbers (
[--/+]
Rotate the dial
To perform the write when the umbers (XXXX) blinks:
[MEMORY/ENTER]
Press the
***** : instruction RAM address
XXXX: instruction RAM address data
Note: When parenthesis is the position of instruction RAM
address data, up/down of the menu item by the
are invalid
The umbers which can be changed will blinks
[TUNING +]
To select the digit: Press the
To select the number when the umbers (
[--/+]
blinks: Rotate the dial
To perform the write when the umbers (XXXXXXXX) blinks:
[MEMORY/ENTER]
Press the
***** : coefficient RAM address
XXXXXXXX: coefficient RAM address data
Note: When parenthesis is the position of coefficient RAM
address data, up/down of the menu item by the
are invalid
The umbers which can be changed will blinks
[TUNING +]
To select the digit: Press the
To select the number when the umbers (
[--/+]
Rotate the dial
To perform the write when the umbers (XXXX) blinks:
[MEMORY/ENTER]
Press the
: instruction RAM address
*****
XXXX: instruction RAM address data
Note: When parenthesis is the position of instruction RAM
address data, up/down of the menu item by the
are invalid
[MOVIE]
button in order.
button in order again.
[--/+]
dial)
[--/+]
dial)
[--/+]
dial)
[TUNING --]
or button
***** or XXXX) blinks:
button
[MENU]
[TUNING --]
or button
***** or XXXXXXXX)
button
[MENU]
[TUNING --]
or button
***** or XXXX) blinks:
button
[MENU]
dial
dial
dial