Printing The Stored Document After Changing The Settings - Toshiba e-studio 281c Operator's Manual

6.Printing Stored Documents (Cont.)
4
Press the [PRINT] button.
• Printing of the set pages starts.
To stop printing a stored document during this operation
Select the job you want to stop from the print job menu or scan job menu, and then press the
[DELETE] button. For details, see
6

Printing the stored document after changing the settings

The following settings are available before the stored document is printed.
1. Paper source (Press the drawer icon to be set as a paper source. However, the paper in the drawer
selected for the paper source is used only when its size and type correspond to those of the docu-
ments in the box.)
2. Number of printings (Key them in.)
3. Simplex printing / duplex printing
4. Finishing mode (Selecting the mode is limited depending on the installed optional equipment.)
5. Paper exit (Available when the finisher (optional) is installed)
6. Image shift position
7. Added date and time position
8. Page number position
194
6.e-FILING
P.235 "8.JOB STATUS".
1
2
3 4
5
6
7
8