Motor Trike GL1800 SPYDER / 2+2 Service Manual page 8

Table of Contents

Advertisement

9. Grease the forward spline of the driveshaft front and rear with high quality
lithium grease every 24 month, or 20,000 to 24,000 miles. This requires the
removal of the driveshaft. Be careful not to get the front and rear U joints "out
of time" on reassembly.
NOTE:
To aid in installation of the driveshaft, compress spring at spline joint, and hold with
wire, or heavy cord around each universal, and draw tight.
10. Fender Bras: It is OK for your fender bras to get wet. However, you must
remove them when you are finished riding for the day. If you leave wet fender
bras on your trike, for an extended period of time, the paint underneath could
blister and peel. Dry the fender bras, and dry the body before reinstalling. The
use of a good wax on the fender is recommended and good vinyl protectant on
the bras.
Nut types
Standard Nuts
Ny-Lock Nuts

Advertisement

Table of Contents
loading

Related Products for Motor Trike GL1800 SPYDER / 2+2

Table of Contents