Changing The Display Mode - Panasonic CF-C2 series Operating Instructions Manual

Description of Parts

Changing the Display Mode

NOTE
 Do not press the tablet buttons, and do not change the display mode by holding the upper part of the display.
 Do not allow your fi ngers to get caught between the display and the base when changing the display mode.
 Do not allow the tether for the pen (included) or other cables to get caught between the display and the base when
changing the display mode.
 If peripheral devices connected to the computer make it hard to change the display mode, disconnect the devices
and then change the display mode.
 Switching to the Tablet Mode
 Switching to the Laptop Mode
16
A Lift up the display so it stands perpendicular to the body.
B Slide the Display Rotation Lock (A) to the unlocked position.
C Hold the bottom left and bottom right of the display, and rotate the
display in the direction of the arrow until it clicks.
A
NOTE
 The display cannot be rotated more than 180 degrees in the direc-
D Close as the display faces up.
NOTE
 Close the display completely and make sure there is no space
A Lift up the display so it stands perpendicular to the body.
B Hold the bottom left and bottom right of the display, and rotate the
display in the direction of the arrow until it clicks.
NOTE
 The display cannot be rotated more than 180 degrees in the direc-
C Slide the Display Rotation Lock (A) to the locked position.
tion of the arrow, or in the opposite direction of the arrow. Do not
attempt to rotate the display more than 180 degrees or in the oppo-
site direction using force.
between the keyboard and the display; otherwise the computer will
remain in Laptop Mode.
tion of the arrow, or in the opposite direction of the arrow. Do not
attempt to rotate the display more than 180 degrees or in the oppo-
site direction using force.