Pioneer VSX-D510 Service Manual page 57

Display
1
SIGNAL SELECT
DIGITAL DTS
ANALOG DIGITAL
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal assigned for the
current component :
DIGITAL : Lights when a DOLBY DIGITAL signal is
played.
DTS : Lights when a source with DTS audio signals is
played.
ANALOG : Lights when an analog signal is selected.
DIGITAL : Lights when a digital audio signal is selected.
2 DTS indicator
Lights when DTS mode is being used.
3
DIGITAL indicator
When the (DOLBY)/DTS mode of the receiver is on,
this lights to indicate playback of a Dolby Digital signal.
However, PRO LOGIC lights during two channel
playback of Dolby Digital.
4 OVERLOAD indicator
This lights when an analog signal is too high (the
SIGNAL SELECT would have to be on ANALOG). It
indicates the sound is distorting and the input signal
should be reduced.
5 ATT indicator
Lights when ATT is used to attenuate (reduce) the level
of the input signal (can only be used in ANALOG mode).
6 DIRECT indicator
Lights when source DIRECT is in use. This function
bypasses all tone, balance, DSP and Dolby Surround
effects.
7 SPEAKER indicator
Shows if the speaker system is on or not. SP 3A means
speakers are switched on. SP 3 means speakers are
switched off.
2 3 4 5
DIGITAL
PRO LOGIC
DSP
0
9
6 7 8
ATT MONITOR
DIRECT
SP
MIDNIGHT
LOUDNESS MONO
- = ~
8 MONITOR indicator
Lights when is selected. Used to hear a
MONITOR
recording as it's being made.
9 CHARACTER display
Shows the radio frequency or function (DVD/LD, CD, etc.)
receiver is using .
0
PRO LOGIC indicator
When the (DOLBY)/DTS mode of the receiver is on,
this lights to indicate playback of a two channel source.
- DSP indicator
Lights when any Advanced Theater or DSP mode is
selected.
= MIDNIGHT indicator
Lights when MIDNIGHT listening mode is in use.
~ LOUDNESS indicator
Lights when the LOUDNESS is on. Use to boost the bass
and treble at low volume.
! TUNER indicators
:
MONO
Lights when the mono mode is set using the
button.
MPX
:
TUNED
Lights when a broadcast is being received.
:
STEREO
Lights when a stereo FM broadcast is being received in
auto stereo mode.
@ MASTER VOLUME LEVEL
Shows the overall volume level. Volume level is main-
tained even when the power is off.
minimum level, and indicates the maximum level.
0dB
• Depending on the level settings you make for
individual channels, the MAX level can range be-
tween –10dB and 0dB.
VSX-D510
RF ATT
A TUNED
STEREO
dB
! @
indicates the
---dB
57