Remove The Contact Metals - Panasonic TC-P42S60 Service Manual

8.2.12. Remove the Metal bracket bottom
1. Remove the screws (×4
bracket bottom.
8.2.13. Remove the M8 nut metals and the
M8 metals
1. Remove the screws (×1
metals and the M8 metals.
8.2.14. Remove the K-Board
1. Remove the screws (×2
case.
2. Disconnect the connector (K10).
3. Remove the claw (×1
4. Remove the LED panel.
, ×2
) and the Metal
each) and remove the M8 nut
) and remove the LED panel
) and remove the K-Board.
8.2.15. Remove the Cabinet assy from the
Plasma panel section
1. Place the Cabinet assy on a flat surface of a table (cov-
ered by a soft cloth) and a cushion.
2. Remove the screws (×17
3. Remove the Cabinet assy from the Plasma panel section.

8.2.16. Remove the Contact metals

1. Remove the screws (×14
2. Remove the Contact metal side (L, R).
3. Remove the screws (×15
4. Remove the Contact metal bottom.
20
).
).
).