Ericsson W25 Quick Manual

Quick Guide for Ericsson W25
This is a basic quick guide to help with the initial installation of the W25 for internet access. We
recommend customers also read the supplied manual before installing the W25.

Initial Setup:

Insert sim card: remove top lid on the W25 and insert sim above yellow sticker as shown
Antenna – Connect the supplied antenna
Power – connect power to the W25
Cable – connect the network cable to the LAN 1 port on the W25 and to your PC
Step 1)
Open a web browser such as Internet Explorer, enter http://192.168.1.1 in the address bar and
press enter.
This will open up the Ericsson web interface.
Login: user
Password: user (To change this password see the of the user manual)
Step 2)
The next step is to configure the W25 using the setup wizard.
To enter the wizard, click the [Configuration Wizard] button on the opening page.
Step 3)
Once you have opened the configuration wizard the first screen will ask for a sim password
(Some sim cards will come from your service provider with a password others won't) once you
have entered your pin click the next button.
Step 4)
The wizard will ask for your APN. (Your APN is provided to you by your network operator) You
cannot complete the wizard without an APN.
Eg. for Telstra Mobile Data the APN (3G): telstra.internet
APN (2G): telstra.internet
Step 5)
On the next page, if your service provider has given you PPP authentication details, they can
be entered here. If they have not provided these to you then proceed to the next step. This
is where you can also enter your username and password if you have a Bigpond account.
Step 6)
If you wish to connect your computer to the W25 using WiFi, then tick the check box. If
you just desire to use the network cable this does not need to be ticked.
Step 7)
On the next screen, you will see all the settings you have entered. If you are happy with
these click finish.
You now should be able to access the internet using the Ericsson W25