The spark plugs in your car are a
special platinum-tipped design for
longer life. The spark plugs should
be replaced according to the
distance recommendation in the
maintenance schedule.
Replacement
HOLDING CLIPS
Loosen the two holding clips by
1.
turning the heads one-quarter turn
counterclockwise with a flat-tipped
screwdriver. Remove the cover by
pulling it straight up.
Clean off any dirt and oil that have
2.
collected around the ignition coils.
Spark Plugs
CONNECTOR
LOCK TAB
IGNITION COIL
Disconnect the wire connector
3.
from the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.
Maintenance
CONTINUED
219