Advertisement
3
Paper replenishing
Paper path
Procedure
B
A
4.
Spare paper rolls
Fire & Security Products
Siemens Building Technologies Group
B1Q101
1. Switch off the printer via control unit.
2. Swing out the printer unit:
remove the screws on the right-hand side or open hinged cover with the key,
swing out the unit to the left.
3. Remove the used paper tape.
4. Lift the paper flap A and slide a new paper roll over the spindle B.
5. Press the leading edge of the paper lightly against the flap and feed it into the
printer through the slot C.
Push down the release lever D to insert the paper.
6. The paper can be transported by means of the knurled wheel E.
7. Thread the leading edge of the paper around the take-up roller F and fix it with the
paper gripper G.
8. Press winding up key H, the paper take-up motor is switched on for approx. 20
secs.
9. Switch on the printer.
C
5.
–
379977
Spare paper rolls, 4 pcs.
or „JUJU TP 50KS–A" or „HONSHU PS 65 B1" or „MITSUBISHI F–200 U7X".
B2Q191
E
D
H
5. 6. 8.
F
G
7.
5
e1510a
03.2002
Advertisement
