Operation; Zooming; Focusing; Input Select - JVC AV-P720U Instructions Manual

OPERATION

Zoom
• When the ZOOM button "TEL" is pressed, the image on the
monitor screen will become gradually bigger; when the
ZOOM button "WIDE" is pressed the image will become
gradually smaller.
• Every time the ZOOM button is pressed, focusing will be
automatically re-adjusted.
• When the ZOOM button is continually pressed, the zoom
speed will increase after a while.

Focusing

AUTO FOCUSING
• When the AUTO button is pressed, focusing on the subject
will be carried out automatically.
• Once auto focusing is completed, this particular function
will be suspended and the focusing on the subject will re-
main constant.(The indicator lamp will blink while the auto
focusing is in operation; once completed the lamp will re-
main lit for one second and then go out.)
Note:
•
Auto focusing may not work on the following subjects. If so, use manual focusing instead.
• Subjects with minimal contrasts or shiny surfaces.
• Subjects with detailed and repetitive patterns such as horizontal stripes, checked patterns, etc.
• Three-dimensional or moving subjects
• The subject is not centred on the screen.
• The screen is dark.
•
AUTO FOCUS will not operate while 'ON SCREEN ADJUSTMENT' is selected.
MANUAL FOCUSING
• When you wish to focus on a particular part of a three-
dimensional object, adjust focusing by pressing the
MANUAL FOCUS button.
• When the NEAR button of manual focusing is selected, fo-
cus will be on the higher part of the three-dimensional ob-
ject; and when the FAR button is selected focus will be on
the lower part of the three-dimensional object.

Input Select

•
The INPUT SELECT button can change the signals of the
main unit's CAMERA IMAGE SIGNAL terminal and VIDEO
INPUT terminal, and send them to the VIDEO OUTPUT
terminal. Once selected, the indicator lamp will light up.
•
When CAMERA is selected, image signals from the unit's
camera will be used.
•
When VIDEO is selected, signals from the VIDEO INPUT
terminal will be sent to the VIDEO OUTPUT terminal.
Note:
• Image signals from the VIDEO INPUT terminal can-
not be sent to the CAMERA OUTPUT terminal.
INPUT SELECT
NEAR
CAMERA VIDEO MANUAL
Front Control Panel
INPUT SELECT
NEAR
CAMERA VIDEO MANUAL
Front Control Panel
INPUT SELECT
NEAR
VIDEO MANUAL
CAMERA
Front Control Panel
INPUT SELECT FOCUS
NEAR
CAMERA VIDEO MANUAL
Front Control Panel
S-Video signal
CAMERA
INPUT SELECT
video signal
Composite
signal
Composite signal
FOCUS ZOOM
FAR
AUTO TELE WIDE
FOCUS ZOOM
FAR
AUTO TELE WIDE
FOCUS ZOOM
FAR
AUTO TELE WIDE
ZOOM
FAR
AUTO TELE WIDE
CAMERA
OUT
VIDEO
IN
VIDEO
9