Try Out The Voice Commands; Pair Your Mobile Phone; Pairing Mobile Phone - Alfa Romeo Blue&me User Manual

TRY OUT THE VOICE
COMMANDS
At each stage of your dialogue with the sys-
tem, you can always use the voice com-
mand "Help", to get detailed indications
about the voice commands available at the
current dialogue stage.
To try out the "Help" function, proceed as
follows:
❒ Press the steering wheel button
❒ After Blue&Me™ plays a tone indi-
cating that voice recognition is active, pro-
nounce "Help". Blue&Me™ will
speak the list of voice commands avail-
able.
❒ After the general help message is finished,
pronounce "Settings" and then "Help".
Blue&Me™ will speak again the list of
voice commands available for the SET-
TINGS menu.
❒ You can then pronounce one of the avail-
able commands and proceed with the di-
alogue as you like.
❒ If you need further help, press
pronounce again "Help".

PAIR YOUR MOBILE PHONE

IMPORTANT Carry out this operation only
with the car stopped.
To pair your mobile phone, proceed as fol-
lows:
❒ Press
ô
and pronounce "Settings"
then, at the end of the Blue&Me™
message say "Pairing".
❒ The system will show the phone pairing
ô
.
PIN number on the multifunction display.
For the next two steps, consult your mo-
bile phone owner's manual about Blue-
tooth
® pairing.
❒ On your mobile phone, query for devices
equipped with Bluetooth
technology (the setting on your mobile
phone might be called Discover or New
Device ). In this list you will find
"Blue&Me" (name identifying the
Blue&Me™ system on your car): select
it.
ô
and
❒ When prompted by the mobile phone, en-
ter the PIN number shown on the instru-
ment panel display using your mobile
phone keypad. If pairing is successful, the
system will say "Connecting" and at
the end the display will show as confir-
mation message, the ID of the paired mo-
bile phone.
It is essential to wait until you see this con-
firmation message on the display. Pressing
^
˜
or before the message is displayed
may cancel the pairing process. If the pair-
ing process fails, an error message will be
displayed: in this event repeat the pairing
procedure.
❒ At first pairing, Blue&Me™ will say
wireless
®
"Welcome" immediately after connect-
ing. This message will no longer be heard
at next pairing procedures.
11