Lamp Timer Reset - JVC HD-58S998 User Manual

Onscreen Menus

Lamp Timer Reset

The lamp replacement message will appear when you need to change the lamp. After you
replace the lamp, you need to reset the timer which is built into your television.
Press the M
To LAMP TIMER RESET
π †
è
To Enter
The following message will appear.
PRESS OK TO RESET THE LAMP
TIMER.
Press the OK button while the above message appears on the television screen.
THE LAMP TIMER IS RESET
SUCCESSFULLY.
The lamp timer has now been reset.
Notes:
• You can use the Lamp Timer Reset only after replacing the lamp.
• See Page 77 for instructions on lamp replacement.
58
button
ENU
CLOCK / TIMERS
PREVIOUS
SET CLOCK
ON / OFF TIMER
LAMP TIMER RESET
NEXT PAGE
SELECT OPERATE EXIT
MENU