Lamp Reset - JVC HD 56G786 - 56" Rear Projection TV User Manual

Clock/Timers
Lamp Timer Reset
The lamp replacement message will appear when you need to change the lamp. After you
replace the lamp, you need to reset the timer which is built into your television.
Press the M
To LAMP TIMER RESET
π †
è
To Enter
The following message will appear.
PRESS OK TO RESET THE LAMP
TIMER.
Press the OK button while the above message appears on the television screen.
THE LAMP TIMER IS RESET
SUCCESSFULLY.
The lamp timer has now been reset.
Notes:
• You can use the Lamp Timer Reset only after replacing the lamp.
• See Page 93 for instructions on lamp replacement.
66
button
ENU
CLOCK / TIMERS
PREVIOUS
SET CLOCK
ON / OFF TIMER
LAMP TIMER RESET
NEXT PAGE
SELECT OPERATE EXIT
MENU