Video Status; Natural Cinema - JVC HD-52G787 User Manual

Button Functions

Video Status

The V S button gives you a choice of four TV picture display settings, including a
IDEO TATUS
display of your own preferences.
Standard - Resets the picture display to the factory settings.
Dynamic - Gives a vivid picture with better contrast when
viewing in a brightly lit room.
Theater - Gives a rich, film-like look to video when viewing in
a dimly lit room.
Game - Used for when you are playing video games
connected to your TV.
Press the V
By every press of the V
Note:
• You can also change the mode by pressing the π † buttons.
• Each mode is memorized for each input connected to the TV.
• You can also access the FRONT CONTROL PANEL screen by using the M
the side of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has VIDEO STATUS and ASPECT menus. Choose VIDEO
STATUS by pressing M
√
+/- buttons ( OPERATE
• There are four video status settings: Dynamic, Standard, Theater and Game. Each video
status setting has a separate memory for HD (1080i/720p) and SD (480p/480i) video signal.
Each video status can be chosen along with your favorite picture settings (Tint, Color,
Picture, Bright, Detail, etc.)
– When an HD signal is displayed: Your HD settings are recalled for the video status you
are using.
– When an SD signal is displayed: Your SD settings are recalled for the video status you
are using.
– This function considers PC input as an HD signal and PIP and SPLIT screens as an SD
signal.

Natural Cinema

Natural cinema corrects the problem of blurred edges which may occur when viewing a program
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges
of these programs, press N
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the
television rate of 30 frames-per-second.
Press the N
Notes:
• The natural cinema mode is automatically set to "AUTO" in
the following cases:
- Turning on or off
- Changing the channel or input mode
- Using multi-screen functions
• If you are in PC mode, Natural Cinema can not be used.
66
S button
IDEO TATUS
S
IDEO TATUS
† on the side panel and choose a mode by using the C
ENU
®
).
C
ATURAL INEMA
button
C
ATURAL INEMA
button, you change the mode.
and set it to AUTO. Natural Cinema helps correct
VIDEO STATUS
STANDARD
DYNAMIC
THEATER
GAME
button on
ENU
HANNEL
NATURAL CINEMA
AUTO
ON
OFF