Digital Sound; Software Version; Software Update - JVC HD-52G787 User Manual

Onscreen Menus

Digital Sound

You can select the optical digital sound output, either PCM or Dolby Digital when your TV is
connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can
enjoy listening in 5.1ch sound when watching digital broadcasts.
Press the M
To DIGITAL SETUP
π †
è
To enter
To Digital Sound
π †
è
To select PCM or DOLBY DIGITAL
Press the M
Notes:
• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it
cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 18.

Software Version

You can confirm the Software Version.
Press the M
To DIGITAL SETUP
π †
è
To enter
To Software Version
π †
è
To enter
è
Select close when you are finished confirming your software version
Press the M

Software Update

At first, connect the USB memory into the USB connector. This function will appear only when
the USB memory is inserted into the USB connector.
Press the M
To DIGITAL SETUP
π †
è
To enter
To Software Update
π †
è
To enter
Checks the card if it needs an update or not
π †
Press the M
54
button
ENU
button when finished
ENU
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
button
ENU
button when finished
ENU
button
ENU
button when finished
ENU