Input; Menu (On Tv's Front Panel); Light - JVC AV-48WP30 User Manual

Button Functions

INPUT

The AV-56WP30 or AV-48WP30 can receive signals from a variety
of sources. Use the I
NPUT
Antenna (for signals from the RF coaxial cable) or VIDEO 1
through VIDEO 4 (for signals from an audio/video device like a
DVD player or VCR) or DIGITAL-IN.
The INPUT menu will appear when you press I
signal source, press I
NPUT
the menu. If no device is connected to an input, a grey screen will
appear. When you have selected a signal source, either press E
to leave the menu or wait a few seconds for the menu to disappear
automatically.
• Pressing C +/- will automatically select the antenna (12) as the
H
source.

MENU (on TV's Front Panel)

You can also access the onscreen menu system by pressing the M
television's front panel. When you press this button, an additional onscreen menu will appear.
This menu will show you the current channel (07 on the menu shown above), the current signal
input in use.
You can move to the other onscreen menus by pressing the

LIGHT

The remote control includes illuminated buttons for key features like C
the L button to turn the illumination on. The illumination will shut off automatically after a
IGHT
few seconds.
58
button to select the signal source:
NPUT
, each press will move to the next item in
FRONT PANEL CONTROL
CHANNEL
INPUT
NEXT PAGE
SELECT BY FRONT KEY
OPERATE BY FRONT KEY
. To select a
XIT
DIGITAL-IN
button on the
ENU
07
TV
arrow.
+/- and V
H
INPUT
12
VIDEO-1
VIDEO-2
VIDEO-3
VIDEO-4
INPUT Menu
+/-. Press
OL