V1 Smart Input; Position Adjustment; Power Indicator - JVC I Art PRO AV-65WP84/HA User Manual

V1 Smart Input

This feature is used if you have connected an AV Receiver to your television. By turning this
feature on, your television can automatically detect the signal source from your components
that are connected to your AV Receiver.
Press the M
π †
To V1 SMART INPUT
è
To turn ON or OFF
Press the MENU button when finished
Notes:
• If you do not have an AV Receiver connected to your
television, turn this feature OFF. By doing so, you can take
advantage of using AV CompuLink components with your
television.
• Some AV Receivers may not work with this function.

Position Adjustment

Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama, cinema, or full.
Press the M
π †
To POSITION ADJUSTMENT
è
To enter
è
π †
To adjust the position
Press the M
Notes:
• To reset the adjustment to the center, press the O
• When the arrow disappears, while you are adjusting the position, the position is at it's
maximum limit.
• If you select regular size with aspect or Multi Screen, position adjustment option is not seen.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when
the aspect is set HD panorama or cinema zoom for 1080i signal.

Power Indicator

Power indicator allows you to adjust the brightness of the
power indicator
Press the M
π †
To POWER INDICATOR
è
To adjust POWER INDICATOR LOW, HIGH or OFF
Notes :
• When OFF is selected :
The LED disappears if the you have a TV signal.
The LED is lit as "LOW" when there is no TV signal.
button
ENU
button
ENU
button to finish
ENU
button
ENU
Initial Setup
button.
K
43