How Do I Access The Configuration Interface - Devolo MicroLink dLan Wireless Manual

Hide thumbs Also See for MicroLink dLan Wireless:
Table of Contents

Advertisement

Open the configuration interface as described above and change the IP
address of the MicroLink dLAN Wireless to the one you have chosen in the
configuration menu under 'IP Address'.
Also refer to the menu description in the section entitled, 'Advanced'.
Next, restore the computer which you have just renamed to its previous IP
address. Since all devices on the LAN now belong to the same address range
(again), they can be recognized without problem.
4.2.2

How do I access the configuration interface?

To configure the MicroLink dLAN Wireless on your WLAN network, manually
enter the address 'http://192.168.0.252' in your Internet browser, or create a
direct shortcut to this address in the Start menu or on your Desktop. This is
how you should proceed:
The default language setting for the menus is based on the language version
of your web browser. The menu language of the MicroLink dLAN Wireless
Wireless LAN
MicroLink dLAN Wireless
For CD setup select 'Start Setup Wizard'.
The 'MicroLink dLAN Wireless Setup' dialogue window appears. Start
the setup by clicking on Start Setup.
After the installation has been completed successfully, open the config-
uration interface of the dLAN adapter by clicking Start
devolo
MicroLink dLAN Wireless Setup or by clicking the
'MicroLink dLAN Wireless Setup' icon on your desktop.
|
Network configuration
After
dLAN
(using the IP address range 10.x.x.x)
MicroLink dLAN
Ethernet/MicroLink dLAN USB
MicroLink dLAN
Ethernet/MicroLink dLAN USB
MicroLink dLAN Ethernet/
MicroLink dLAN USB
Router from another manufacturer
e. g. DSL modem
and MicroLink dLAN Ethernet
|
devolo MicroLink dLAN Wireless
19
Programs

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MicroLink dLan Wireless and is the answer not in the manual?

Table of Contents