Top View - Philips VR120 Service Manual

GB 114 10.
10.1.2 Deck layout diagram
Deck in position „threaded out". The following diagrams
indicate the relative position of the gearwheels and levers
when the deck is in the threaded out (cassette-compartment
down) position.
Pos. 24
Loading
arm left Pos. 25
Loading
arm right
Pos. 27
Loading gear
10.1.3 The lift
Refitting the lift compartment:
Ensure the lift compartment is down and gear A is rotated
one click stop anticlockwise from the down position.
The removal and refitting of the lift can be carried out in all
deck positions with the exception of „eject" (ensure that gears
103/105 are free and if present the cassette loader gear 2
pos.105 is positioned to the rear).
To remove the lift:
Free the holding bracket ( see figure 10-2 ) by rotating it up
and back from the upper end.
Unscrew the 4 screws on the underside of the deck.
Carefully remove the lift vertically, noting the position of the
record protect operating lever.
VR120 Tape deck
Underside view
Pos. 44
Slider
Pos. 111
gear
Cam wheel
reverse

Top view

Pos. 31
Reverse lever
Pos. 113
Cam wheel
Pos. 112
tension
Tension
lever
Pos. 27
Loading
gear
Pos. 129
Reverse kicker
"optional"
Pos. 46
Cam shaft
Pos. 32
Intermediate
lever
Pos. 45
Cam wheel
for full loaded wind
Pos. 12
Tension
cranc
Figure 10-2