Table of Contents
Advertisement
INSTALLATION
Removal of transport bracket
The appliance is fitted with a transport bracket to avoid any
possible damage during transport.
Before using the appliance, the transport bracket at the
back MUST be removed.
1.Unscrew the two screws A and the four screws B with a
flat screwdriver or a No. 8 hex nut box spanner.
2.Remove the transport bracket.
3.Replace the four outer screws B on the machine and
tighten them.
4.Remove the two seals C from the hose holder and clip
them into the openings of the machine D.
Note: do not forget screw back and tighten the four outer
screws B.
28
A
B
D
C
1
1
1
2
4
D
4
Advertisement
Table of Contents
