Table of Contents
Advertisement
Removing the LCD Module
1.
Remove the four screws that secures the middle cover; two one each side.
2.
Detach middle cover with the assistance of a plastic flat head screw driver.
3.
Disconnect the LCD cable then take out the cable from the upper case.
4.
Disconnect the left wireless LAN antenna line. Then take out the antenna from the upper case with a
tweezers.
5.
Unscrew the four screws holding the LCD hinges; two on each side.
6.
Then remove the entire LCD module.
52
Chapter 3
Advertisement
Table of Contents
