Altai Technologies U1 Quick Setup Manual

Super wifi usb client

Advertisement

Quick Links

ALTAI U1
SUPER WIFI USB CLIENT

QUICK SETUP GUIDE

Version 1.0
Date: September, 2013
Altai Technologies Ltd. All rights reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the U1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Altai Technologies U1

  • Page 1: Quick Setup Guide

    ALTAI U1 SUPER WIFI USB CLIENT QUICK SETUP GUIDE Version 1.0 Date: September, 2013 Altai Technologies Ltd. All rights reserved...
  • Page 2: Package Contents

    5. Connect the other end of the USB cable to the USB port of your computer. Because U1 gets its power from computer, no external power supply is needed. The power LED should light up when U1 is plugged in and the PC is on. Altai Technologies Ltd. All rights reserved...
  • Page 3 U1 Quick Setup Guide for 1.0.0.9 TPS13-001_rev1.0 Download and Support Latest software and document are available at the following link http://www.altaitechnologies.com/support_download.php Technical Support: u1support@altaitechnologies.com Find out the OS of Your Computer The installation and configuration procedures are different depending on the OS of your computer.
  • Page 4 U1 Quick Setup Guide for 1.0.0.9 TPS13-001_rev1.0 Please note Windows has 32 bit version and 64 bit version. You can check the version information below: Altai Technologies Ltd. All rights reserved...
  • Page 5: Windows Xp

    U1 Quick Setup Guide for 1.0.0.9 TPS13-001_rev1.0 Windows XP 1. Download the U1 installer for Win XP from Altai website or copy it from U1 installation CD and put it to a specific directory. In this case, it is put on the desktop.
  • Page 6 U1 Quick Setup Guide for 1.0.0.9 TPS13-001_rev1.0 3. Now the system will try to locate the U1 driver folder at your selected directory. Please make sure the directory is correct and click “OK”. 4. You will find the installation window below: Note: If it pops up the following “Software Installation”...
  • Page 7 5. Please wait until the installation is finished. The successful page will be shown as following. 6. Now U1 driver is successfully installed and you can use it to connect to wireless network the same as you are using your laptop integrated wireless card.
  • Page 8 U1 Quick Setup Guide for 1.0.0.9 TPS13-001_rev1.0 Altai Technologies Ltd. All rights reserved...
  • Page 9 Windows 7 32 bit / 64 bit Part A. New installation of U1 driver Download the U1 installer or copy the installer from U1 installation CD according to the system you are using and put it to a specific directory. In this document, it is put on the desktop.
  • Page 10 U1 Quick Setup Guide for 1.0.0.9 TPS13-001_rev1.0 6. Please wait for a while before you see the following successful page. Altai Technologies Ltd. All rights reserved...
  • Page 11 U1 Quick Setup Guide for 1.0.0.9 TPS13-001_rev1.0 7. Now U1 driver is successfully installed and you can use it connect to wireless network the same as you are using your laptop integrated wireless card. Altai Technologies Ltd. All rights reserved...
  • Page 12 Part B. Upgrade from previous verson of U1 driver 1. If you have old version of U1 driver installed, you may see the following case when you plug in U1. There are U1 and an unknown device listed in the Device Manager.

Table of Contents