Quick Hints & Tips; Power Off - SoundCraft Si Compact Quick Start Manual

QUICK HINTS AND TIPS
Full details of all functions are provided in the user guide if needed, but the following bullets
cover some other common functions.
•
•
•
•
•
•
•
•
•

POWER OFF

The Si Compact incorporates a safety feature to prevent the power 'accidently' being turned off.
To shut down the console:
1. Press & hold the POWER ON key for ~@2 seconds the power light will flash orange
2. To confirm the shut down press the POWER ON key again whilst the light is flashing
If the confirmation is not received within ~5 seconds the POWER ON key will cancel the
power-off request and revert to solid green.
16
Snapshots — Press the STORE key to create a snapshot, the CUE LIST key opens the
list of snapshots and you can select the next cue to recall and amongst other things,
edit the cue name.
Home Page — Pressing the MENU key will return the touch screen to the home page.
Mute Groups — Assigned using the SETUP key combined with the 1-4 keys and SELect
keys on the channels and buses.
Lexicon™ — Pres the LEX key to open the window to allow changing the FX type and using
the SCROLL/ADJUST encoder and parameters with the four encoders below the screen.
INPUTS — Amongst other functions this screen allows the name of the channel and the
input patching to be changed.
OUTPUTS — Amongst other functions this screen allows the name of the bus and the
output patching to be changed.
SOLO — Press and hold a SOLO key to have an auto-cancelling momentary solo.
Interrogate — Press and hold a function key like EQ or LR, the SELect keys will light on
any channels where this function is 'ON', and whilst in this mode the SELect keys may
be used to toggle the function.
CLR – CLR (clear) works logically with most audio keys to reset groups of parameters
such as GEQ, Mute Groups, EQ Compressors & similar, use CLR + BUS'n' to reset
contributions from all channels (or buses) to BUS'n'
Soundcraft Si Compact Quick Start Guide 0311