Groups/Auxes; Groups; Auxes; Matrix Mix - Mackie TT24 Quick Start Manual

6.10 Groups/Auxes

Figure 6-21 GRP/AUXES
Press the GRP/AUX QuickMix button to open the
GRPS/AUXES Touchscreen.

6.10.1 GROUPS

Touch a GROUPS button to assign the selected chan-
nel to that Group. The highlighted buttons indicate
assignments (in Figure 6-19, no Group is assigned).

6.10.2 AUXES

Adjust the QuickMix knob corresponding to an Aux
number or pair to set the selected channel's level to
that Aux. An Aux labeled with two numbers indicates a
stereo-linked Aux, which have a PAN control to position
the selected channel in the stereo Aux field. Push the
QuickMix knob associated with an Aux level to toggle it
between pre- and post-fader.

6.11 Matrix Mix

Display the MATRIX MIX Touchscreen by pressing
the MATRIX QuickMix button. Activate the matrix by
selecting ALL ACTIVE which sends the Matrix signals
to the Group outputs.
Matrix-Plus delivers extremely flexible 11 x 8 matrix
mixing. Although the default inputs to each matrix are
Groups 1–8, Left, Right, and Center, virtually any other
signal can be patched into the Matrix.
Press one of the MATRIX MIXER SELECTION
buttons A–H to select a Matrix for editing. The knobs
control the input levels to the selected Matrix. The bot-
tom-right knob controls the master output level for the
selected Matrix, which is reflected on the meter.
44
TT24 DIGITAL LIVE CONSOLE
Figure 6-22 MATRIX MIX
Press the desired QuickMix knob to display the screen
in Figure 6-23 to select the Matrix input signals.
Figure 6-23 MATRIX MIX Selection/Assignment
The following input signals are available to the matrix:
• Analog inputs 1–24 pre/post fader
• Digital inputs 25–48 pre/post fader
• Line inputs 1–8 pre/post fader
• Groups 1–8 Mono, Left/Right, Center (if available)
• Main Left, Right or CTR/Mono post fader
• Stereo inputs Left and Right pre/post fader
• Internal effects returns pre/post fader

6.11.1 Delay

Each Matrix output has a 600 ms delay to allow time
alignment of multiple speaker groups in a large venue.
The Matrix Output Delay is adjusted by touching DE-
LAY SETUP from the MATRIX MIX Touchscreen.