Electrical Connection; Door Reversibility - Electrolux ERD 165 C User Manual

Electrical connection

Before plugging in, ensure that the
voltage and frequency shown on the
serial number plate correspond to your
domestic power supply. Voltage can
vary by ±6% of the rated voltage.
For operation with different voltages, a
suitably sized auto-transformer must
be used.
The a a ppliance m m ust b b e e e arthed.
The power supply cable plug is
provided with a contact for this
purpose.
If the domestic power supply socket is
not earthed, connect the appliance to
a separate earth in compliance with
current regulations, consulting a
specialist technician.
The M M anufacturer d d eclines a a ll
responsibility i i f t t he a a bove s s afety
precautions a a re n n ot o o bserved.
This appliance complies with
the following E.E.C. Directives:
87/308 E E EC of 2/6/87 relative to
•
radio interference suppression.
• 73/23 E E EC of 19.2.73 (Low Voltage
Directive) and subsequent
modifications;
• 89/336 E E EC of 3.5.89
(Electromagnetic Compatibility
Directive) and subsequent
modifications.
Door reversing
Caution!
Unplug the appliance before
carrying out any operation.
If necessary due to the place of
installation or use, the direction of
door opening can be changed from
right to left.
The appliances available on the
market have right opening.
Carry out the following operations
according to the figures and
explanations.
·
It is advisable to carry out the
following operations with the aid of
another person who holds the
appliance doors firmly during the
work.
· Unplug the appliance.
· Open the doors, undo the screws
and remove the middle hinge (H),
moving it away from the refrigerator
body gradually, tilting both doors
slightly. Make sure to also remove
the plastic spacer inserted under
the hinge.
electrolux 33
H