Table of Contents
Advertisement
9.5 PRODUCT INFORMATION
The Product information page allows the user to obtain information concerning the
current software and hardware version of the Receiver and to set its behaviour in the
event a new firmware/software for the Receiver is detected. Highlight Product info in
the System Setting sub-menu and press the RIGHT button on the remote control unit to
enter the Product information page. The following information is displayed:
•
Product Name
•
Product ID
•
Hardware Version
•
Current software version
•
New software detection
Firmware/Software Upgrade (Update Mode)
This feature allows automatic or manual update of the software in the Receiver. In the
Product information page, highlight Update Mode with the UP/DOWN buttons and
press the RIGHT button. Select the desired software update mode with the UP/DOWN
buttons. Confirm your selection by pressing the OK or LEFT buttons. Cancel your
selection by pressing the EXIT button.
9.6 FACTORY RESET
This function allows the user to return the Receiver to factory default settings. From the
System setting sub-menu, highlight Factory reset with the UP/DOWN buttons and
enter the system PIN-code and the reset process will start automatically. The default
PIN-code is 0000. Please note that after resetting the Receiver, all previously stored TV
34
Advertisement
Table of Contents
