BMW 650i Coupe Owner's Manual page 46

> If the LED lights up red when the button is
pressed, either the convertible top com-
partment floor in the luggage compartment
is in the raised position or a malfunction has
occurred. The convertible top cannot be
moved.
Interruption
The automatic sequence of movements is
interrupted if the button for top operation is
released. The sequence can be continued in
the desired direction by pressing the appropri-
ate button.
If the opening or closing action is interrupted for
a longer period, the convertible top remains in
that position for approx. 15 minutes before it
slowly moves to a stable position.
A convertible top which is not completely
opened or closed presents a danger.
Do not interrupt and continue the closing action
several times in succession; otherwise, the top
mechanism can be damaged.<
If the convertible top is not completely
open or closed, then the luggage com-
partment lid cannot be
Comfort operation with remote control
and via door lock
Refer to pages 31 and 32.
Closing manually
Only close the convertible top manually if
absolutely necessary; never open it man-
ually. The convertible top compartment lid can-
not be locked in the event of an electrical mal-
function and would open while the vehicle is
being driven.
Improper handling can lead to
Before closing
1. Open luggage compartment lid.
2. Take the Allen wrench and the screwdriver
from the onboard tool kit, refer to page 214.
3. Pry out the two buttons in the luggage com-
partment with the screwdriver and then pull
44
Online Edition for Part no. 01 41 0 012 832 - © 08/06 BMW AG Online Edition for Part no. 01 41 0 012 832 - © 08/06 BMW AG
opened.<
damage.<
firmly. This unlocks the convertible top
compartment lid.
4. Close luggage compartment lid.
During manual convertible top opera-
tion, the luggage compartment lid
cannot be opened.<
5. Completely open the side windows and the
rear window.
If the rear window cannot be opened using
the switch, it must be lowered manually.
Opening rear window manually
1. Pry out the cover between the rear head
restraints. To do so, place the screwdriver
as close as possible to the locking ele-
ments, as shown in the illustration.
2. Insert the Allen wrench as far as possible
into the opening and turn firmly in the direc-