Head-Up Display - BMW 650i Coupe Owner's Manual

Lowering
If the rollover protection system experienced no
impact after automatic activation, then it can be
lowered again. No tools are necessary for this
purpose.
1. Press the release backward and hold in that
position.
2. Press the rollover protection unit halfway
down from above.
3. Let go of the release.
4. Press the rollover protection unit down until
it snaps into place.
5. Use the same procedure for the second roll-
over protection unit.
Have the rollover protection system checked
after unexpected triggering.
Never move the convertible top when the
rollover protection system is raised.
No changes of any nature may be made to the
individual components of the rollover protec-
tion system and wiring.
Work on the rollover protection system may
only be performed at a BMW center.
Unprofessional attempts to service the system
can lead to failure or malfunction.
For a system check and to ensure long-term
functioning, you must comply with the mainte-
98
Online Edition for Part no. 01 41 0 012 832 - © 08/06 BMW AG Online Edition for Part no. 01 41 0 012 832 - © 08/06 BMW AG
nance intervals of the service requirements,
refer to page 78.<

Head-Up Display*

The concept
With the Head-Up Display, important informa-
tion is projected into the driver's field of view,
e.g. navigation instructions. This enables you to
absorb this information without looking away
from the road.
Switching on/off
Press the button.