Sega Saturn Instruction Manual page 5

IMPORTANT FOR LASER PRODUCTS
The Sega Saturn is a Class 1 Laser Product
Class I Lasers are defined as devices which emit radiation levels "below which biological hazards have not been
established".
Caution-use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
WHEN USING POWER CORDS IN THE U.K.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY
If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in
accordance with the following instructions.
The wires in the mains lead are coloured in accordance with the following code:
BLUE: NEUTRAL BROWN: LIVE
If the colours of the wires in the mains lead of this appliance do not correspond to with the coloured markings identifying
the terminals in your plug, proceed as follows:
Connect the BLUE wire to the BLACK terminal (or the terminal marked with an "N").
Connect the BROWN wire to the RED terminal (or the terminal marked with an "L").
Do not make any connection to the earth terminal marked with the letter E or
symbol or coloured GREEN or GREEN/YELLOW.
The fuse fitted to this appliance is 3A and replacement fuses should be A.S.T.A.
approved to B.S.1362. If you need to replace the fuse, proceed as follows:
Open the fuse compartment with a screwdriver and replace the fuse. Remember to re-fit
the orange fuse cover back into the fuse compartment.