Table of Contents
Related Manuals for Atomic Aquatics Safe Second Inflator
Summary of Contents for Atomic Aquatics Safe Second Inflator
- Page 1 SS1 owner's manual 7-05 7/26/05 5:21 PM Page 1 Safe Second/Inflator O W N E R ’ S M A N U A L 16742 Burke Lane, Huntington Beach, CA 92647 (714) 375-1433 • fax (714) 345-1435 www.atomicaquatics.com M A D E I N T H E U . S . A . 7/05...
-
Page 2: Table Of Contents
Warranty ........................22 I N T R O D U C T I O N Thank you for choosing Atomic Aquatics. Our company is dedicated to creating and manufacturing only the finest diving products. Since our first product release of the world’... -
Page 3: Before Use Warranty Registration
Please take a moment to locate, complete and return your warranty registration NITROX (EAN) USE card to Atomic Aquatics. This card is very important. It will help you obtain warranty service and is our only way to contact you in the event of safety notices, IMPORTANT NOTICE - READ BEFORE YOU USE THIS REGULATOR service updates, or changes regarding this product. -
Page 4: Product Description
SS1 owner's manual 7-05 7/26/05 5:21 PM Page 7 P R O D U C T D E S C R I P T I O N The SS1 is a combination safe second and power inflator for back-up emergency breathing in the event of a malfunction of the primary second stage or air sharing with another diver. -
Page 5: Product Advantages
The SS1 brings you the same high quality performance, design Less gear, less weight, fewer hoses. and workmanship Atomic Aquatics has become famous for. The breathing performance is The SS1 is only slightly larger than the inflator it replaces and uses a single low-pressure comparable to or exceeds that of many primary regulators. -
Page 6: Set-Up
Convenient: Exclusive Quick Disconnect System. These instructions are provided for the convenience of those Exclusive to Atomic Aquatics, the quick disconnect adapter system allows quick and easy detachment of the SS1 from your BCD for transport and storage with your primary capable and familiar with set-up of this type of equipment. - Page 7 SS1 owner's manual 7-05 7/26/05 5:21 PM Page 13 Low Pressure Hose and Quick Disconnect (usually a larger thread size 7/16-20). Choose the low-pressure port that gives you the best orientation for your particular BCD set-up. The LP hose and quick disconnect is usually routed over the left shoulder where it follows the corrugated hose of your BCD.
- Page 8 SS1 owner's manual 7-05 7/26/05 5:21 PM Page 15 If you have an existing inflator, remove it from the end of your BCD hose. This is usually Once you have determined the proper adapter, re-connect the done by cutting the disposable plastic clamp, or if fitted with a reusable one, unthreading cable (if present) by placing the pin through loop of the cable the screws to loosen it.
-
Page 9: Dive Operation
SS1 owner's manual 7-05 7/26/05 5:21 PM Page 17 Final Check D I V E O P E R A T I O N Attach the Quick disconnect fitting to Operation of the SS1 is the same the SS1 by sliding back the sleeve and as any conventional inflator. -
Page 10: Post Dive Care
SS1 owner's manual 7-05 7/26/05 5:21 PM Page 19 CAUTION Back-up Breathing Do’s and Don’ts The SS1 breathes like any conventional second stage. Clear the SS1 of water by first exhaling or using the purge button (front cover), then breathe normally through the Do set up your equipment carefully before each dive and check your entire mouthpiece. -
Page 11: Specifications
The major service interval for the SS1 is semi-annual (2 years). We recommend that you Demand valve body 316 Stainless/Brass Titanium take your SS1 to an authorized Atomic Aquatics dealer annually for a safety inspection. At Orifice 316 Stainless 316 Stainless... -
Page 12: Warranty
Aquatics dealers, or purchased via Internet or mail order sources. To activate this warranty Atomic Aquatics shall not be liable for loss of use of this product or incidental or you must complete and return the warranty registration card within 30 days of purchase.