Advertisement
Quick Links
Advertisement
Related Manuals for Abocom SW800AI
Summary of Contents for Abocom SW800AI
- Page 1 8-Port Fast Ethernet 10/100Mbps N-Way Switch User’s Guide M73-APO09-200...
-
Page 2: Fcc Regulatory Statements
FCC REGULATORY STATEMENTS Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interface, and This device must accept any interface received, including interface that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. - Page 3 INTRODUCTION The 8-Port Fast Ethernet 10/100Mbps N-Way Switch provides you a flexible, reliable, and affordable solution of the Ethernet network. It comes with eight independent 10BASE-T /100BASE-TX ports. Each port delivers up to 200Mbps throughput, and is able to operate in either half or full-duplex modes.
-
Page 4: Package Contents
Each Ethernet port supports MDI/MDIX auto crossover capacity 2K MAC Address with automatic learning and 5-minute aging 8 (Eight) 10/100Mbps Auto-Detection ports Dimension (WxDxH): 190mm x 78mm x 32mm Automatic power saving 8 x RJ45 STP/UTP network ports on rear panel Maximum 100m per port Hub-to-Hub or Node- to-Hub cable length Emission Certification: FCC/CE Class B... -
Page 5: Parts Names And Functions
PARTS NAMES AND FUNCTIONS Front Panel LED Indications POWER LINK/ACT Ethernet Ports (1-8) Ethernet Ports with MDI/MDIX auto crossover capacity. Power Port Connect to the External power cord. Status Description Power On A valid connection Blinks Receives packets Connects to a 100Mbps Fast Ethernet connection Connects to a 10Mbps Ethernet connection... -
Page 6: Hardware Installation
HARDWARE INSTALLATION Hub installation The hub is considered as a “plug and play” network device and requires no special setup except for plugging the appropriate power cord and cables. Put the hub on the appropriate location. When you install the hub, there are two things needed to be considered: Location: Your hub should be located in a place that is central to your home/office...