Philips LC4.9E Service Manual page 14

EN 14 4. LC4.9E AA
4.3.11 PDP Glass Plate
In order to remove/exchange the PDP glass plate:
1. Remove the PDP as described earlier.
2. Remove the T10 screws [1] from the mounting frame.
3. After removal of the frame, you can lift the glass plate from
the set.
4.4 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
• While re-assembling, make sure that all cables are placed
and connected in their original positions. See Figure "Cable
dressing". Be careful with the fragile LVDS cable.
• For a complete description of the Plasma panel, see the
LGE plasma panel Service Manual (12nc is listed on the
frontpage).
Mechanical Instructions
1
Figure 4-17 Glass plate removal
F_15400_119.eps
200505