JVC HM-HDS1U Instructions Manual page 59

SET CHANNEL NUMBER
7
Press CH +/–.
If you are using a DBS receiver, see "ATTENTION
FOR DBS RECEIVER USERS" on next page.
Holding down CH +/– rapidly scans through the
channels.
SET TAPE SPEED
8
Press REC SPEED to set the tape speed. Each time the
button is pressed, the recording speed changes as
follows:
For HDD deck:
SP = LP = EP = SEP = SP = ···
For VHS deck:
SP = EP = SP = ···
SET WEEKLY OR DAILY
9
Press WEEKLY (NUMBER "9") for weekly serials or
DAILY(M-F) (NUMBER "8") for daily serials (Monday–
Friday).
When WEEKLY is selected in the HDD deck
recording, the recorder reserves certain space
corresponding to one-program-period, then writes
new data over the recorded data every week.
When DAILY(M-F) is selected in the HDD deck
recording, the unit reserves certain space
corresponding to five-programs-periods, then writes
new data over the recorded data everyday (from
Monday to Friday).
SET CATEGORY
10
1) Press @# (or 23) to
move the arrow to
"CATEGORY", then
press OK. The
Category Set screen
appears.
2) Select the desired
category by pressing
@%#fi (or 253∞),
then press OK. The Program screen resumes.
RETURN TO NORMAL
SCREEN
11
Move the arrow to "CONFIRM" by pressing @%#fi (or
253∞), then press OK. "PROGRAM COMPLETED"
appears on the screen for a while, then normal screen
appears.
• If there is a conflict in the timer schedule and one
program overlaps with another, the correction screen
will appear. In this case, correct the program data.
See page 61.
• If you select VHS deck, press TIMER. The recorder
turns off automatically and "‰" is displayed on the
display panel.
CATEGORY
CHILDRENS CLASSICS COMEDY DRAMA
EDUCATIONS MOVIES MUSIC NEWS
RELIGIOUS SERIES SHOPPING SPECIAL
SOAPS SPORTS OTHERS MISC.
RETURN
INDEX
PROG.
SELECT WITH [∞523]
SELECT OK END THEN PRESS [OK]
NOTES:
To disengage the timer before recording starts, press TIMER
again. Pressing once more re-engages it.
In case of a power failure after programming, the recorder's
memory backup keeps your selections for approximately 60
minutes.
Programs that start after midnight must have the next day's date.
After timer recording is completed, the recorder's power goes
off automatically.
You can program the timer while a regular recording is in
progress; the on-screen menu will not be recorded.
If the end of tape is reached during timer recording, the
cassette is automatically ejected.
When timer-recording cable or satellite channels through an
external tuner, be sure to keep the cable box or satellite
receiver's power ON.
ATTENTION FOR DBS RECEIVER USERS
If you are using a DBS receiver (unless "DBS RECEIVER SET"
is set to "OFF" pg. 19), the BAND indication (TV or
CATV or DBS) appears under the channel number display. If
the channel number that has been entered requires that the
band be set, "7=DBS" is displayed on the screen. Press the
NUMBER key "7" to select the desired band.
a– TV : To timer-record a regular TV program received
on the recorder.
b– CATV : To timer-record a cable TV program received on
the recorder, or through a cable box (unless
"CABLE BOX SET" is set to "OFF"
c– DBS : To timer-record a satellite program received
through a DBS receiver.
If "BAND" is set to "TV" at the Tuner Set screen (
and "CABLE BOX SET" is set to "OFF" at the Cable Box
Set screen ( pg. 16), CATV will not be displayed on the
Program screen; If "BAND" is set to "CATV" or "CABLE
BOX SET" is set to "ON", TV will not be displayed.
59
EN
pg.16).
pg.13)