Table of Contents
Advertisement
•Each track may be stored in the program memory as many
times as desired (up to 20 tracks).
•To check the programmed track, press the MEMORY button.
Ensure the power is on and a CD has been inserted. Press the
CD MODE button.
1. The CD information appears on the LCD. Press the MEMORY/
SET/CLOCK ADJUST button. "P-01 01" appears on the LCD.
To select the first track to be programmed, press the F.SKIP or
B.SKIP button within eight seconds.
2. To set the track into memory, press the MEMORY/SET/CLOCK
ADJUST button.
3. Repeat these steps to program additional tracks. You can
program up to 20 tracks.
4. To begin programmed playback, press the PLAY/PAUSE
button. Adjust the volume as needed.
5. To skip forward or backward through the programmed tracks,
press the F.SKIP or B.SKIP button. When the disc has
reached the end, it stops automatically.
CD Operation
19
Advertisement
Table of Contents
