Devolo dLAN 500 WiFi User Manual page 69

68 Network configuration
devolo dLAN 500 WiFi
WPS via PBC (Push Button Configuration):
Start the encryption
dLAN 500 WiFi
either by tapping the WPS button on the
front panel of the device or
by pressing the Start setup button on the
user interface under WLAN configuration
Wi-Fi Protected Setup (WPS).
Then press either the WPS key of the Wi-Fi client
you are adding or the WPS button on the configu-
ration interface. Now the devices exchange their
encryption keys and establish a secure Wi-Fi con-
nection. The Wi-Fi LED on the front panel indi-
cates the synchronisation process by flashing.
WPS via PIN:
To interconnect Wi-Fi stations securely in your
wireless network via PIN variants, enter an indi-
vidualised key in the configuration interface under
WLAN configuration
Setup (WPS) PIN and start the encryption pro-
cess by pressing the Start setup button.
Open the configuration interface of the Wi-Fi cli-
ent to be added and transmit the PIN selected on
the dLAN 500 WiFi. Confirm the encryption pro-
cess as described there. Now the devices
exchange their encryption keys and establish a
secure Wi-Fi connection. The Wi-Fi LED on the
process on the
front panel indicates the synchronisation process
by flashing.
Use of the WPS process implies either WPA or WPA2.
For that reason, keep in mind the following automatic
settings depending on the encryption standard (also
refer to 6.4.1 Device security), i.e.
b
if under WLAN configuration
No encryption or WEP is selected in advance,
WPA2 is set automatically. The newly generated
password is displayed under Wi-Fi configura-
tion Access Point in the Key field.
b
if under WLAN configuration
WEP is selected in advance, WPA2 is set auto-
matically. The newly generated password is dis-
played under WLAN configuration
Point in the Key field.
b
if under WLAN configuration
WPA is selected in advance, this setting remains
Wi-Fi Protected
with the previously assigned password.
b
if under WLAN configuration
WPA2 is selected in advance, this setting remains
with the previously assigned password.
Access Point
Access Point
Access
Access Point
Access Point