System Menu - Setting Standard System Parameters - Fujitsu LIFEBOOK LH531 Bios Manual

SYSTEM MENU – SETTING STANDARD SYSTEM PARAMETERS
The System Menu allows you to set or view the current
system parameters. (See Navigating through the Setup
Utility on page 2 for more information.)
The following tables show the names of the menu fields
for the System menu and its submenus, all of the options
for each field, the default settings and a description of
Info
System Time:
System Date:
Drive Configurations
F1 Help
ESC Exit
Table 2: Fields, Options and Defaults for the System Menu
Note that the parameters listed in the following table may vary depending upon your system's configuration.
Menu Field Description
System Time: Sets and displays the current time. Time is in a 24 hour format of hours:minutes:seconds with 2 digits for each.
(HH:MM:SS). Example: 16:45:57. You may change each segment of the time separately. Move between the seg-
ments with the [Tab] key and/or [Shift] + [Tab] keys.
System Date: Sets and displays the current date. Date is in a month/day/year numeric format with 2 digits each for month and
day and 4 digits for year. (MM/DD/YYYY) for example: 02/20/2011. You may change each segment of the date
separately. Move between the segments with the [Tab] key and/or [Shift] + [Tab] keys.
Drive Configurations Opens the Drive Configurations submenu to allow you to enable or disable the installed drives.
Phoenix SecureCore(tm) Tiano Setup
System Advanced
[14:57:01]
[06/23/2011]
Select Item -/Space
Select Menu Enter
Figure 2. System Menu
the field's function and any special information needed
to help understand the field's use.
System Time and System Date can also be
set from your operating system without
using the setup utility. Use the Date and
Time icon on your Windows Control panel
or type time or date from the MS-DOS
prompt.
Security Boot
Adjust calendar
clock. <Tab> selects
field.
Change Values
Select  Sub-Menu
S y s t e m M e n u
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
5