Operation Instructions - Dixon 5000 Series Operator's Manual

OPERATION INSTRUCTIONS

The safe and successful operation of the 5000 Series Models will depend upon the operator h aving the
correct knowledge of all controls used on the mower and making good judgements about the terrain to be
mowed.
NEVER allow anyone to operate the mower without complete knowledge of all controls and
functions.
Sound judgement by the owner will prevent accidents.
BEFORE OPERATING MOWER:
1. Read engine manufacturer's operating and maintenance instructions.
2. Discuss proper maintenance with your dealer.
3. Read and observe all safety instructions on your mower and in the manual.
4. Check engine oil.
5. Check gas caps to be sure they are in place.
6. Be sure parking brake is on.
7. Mower blade drive is off.
8. Know how to stop engine. (Turn key to off position)
STARTING INSTRUCTIONS:
1. Push choke control lever fully forward.
2. Push throttle control lever to 1/2 setting.
3. Insert ignition key and turn to "Start" position. When engine starts, release ignition
key. Key will return to "Run" position.
4. Once engine starts to warm up, slowly move choke control lever to the fully closed
position.
5. Move throttle control lever to the wide open or maximum setting for actual
operation of the mower deck.
6. Engine must be operated at wide open or maximum setting to insure adequate
lubrication, cooling and cut quality of the mower deck.
NOTE:
Cold Engine
Model ZTR 5601 will require a slightly longer warm up period using partial
choke settings.
their