Checking The Signal System - Yamaha YFM 400 FWA P Service Manual

CHECKING THE SIGNAL SYSTEM

1.If the tail/brake light fails to come on:
1.Bulb and bulb socket
Check the bulb and bulb socket for continu-
G
ity.
2.Brake light switches
Refer to "SWITCH INSPECTION". (Manual
No.: 5GH3-AE1)
3.Voltage
Connect the pocket tester (DC 20V) to the
G
bulb socket connector.
Tester (+) lead → Yellow terminal 1
Tester (–) lead → Black terminal 2
Turn the main switch to "ON".
G
Check the voltage (12 V) of the "Yellow"
G
lead on the bulb socket connector.
This circuit is not faulty.
CONTINUITY
CONTINUITY
MEETS
SPECIFICATION
– 31 –
SIGNAL SYSTEM
NO CONTINUITY
Replace the bulb and/or bulb socket.
NO CONTINUITY
Replace the brake switch.
OUT OF SPECIFICATION
The wiring circuit from the main switch to the
bulb socket connector is faulty, repair it.
– +
ELEC