Electrolux EWF 106410 W User Manual page 7

Display
The display shows the following information:
7.1:
• Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample 2.05 ). The duration is calculated
automatically on the basis of the maximum
recommended load for each type of fabric.
After the programme has started, the time
remaining is updated every minute.
• Delayed start
The Selected delay set by pressing the rel-
evant button appears on the display for
few seconds, then the duration of the se-
lected programme is displayed again.
• Alarm codes
In the event of operating problems, some
alarm codes can be displayed, for example
E20 (see paragraph «What to do if...»).
• Incorrect option selection
If an option which is not compatible with
the set wash programme is selected, the
message Err is displayed at the bottom of
the display for a few seconds and the in-
tegrated red light of button 8 start flashing.
• End of programme
When the programme has finished three
flashing zeros are displayed, the pilot light
9 and the pilot light of button 8 go out and
the door can be opened.
7.2: Washing programme phase icons
7.4 7.5
7.3 7.2
• Wash
• Rinses
• Drain
• Spin
By selecting the wash programme, the
washing programme phase icons corre-
sponding to the various phases making up
the programme are shown in the bottom part
of the display. After having pressed button
8 only the icon of the running phase stays on.
7.3: Heating phase
During the washing cycle the display shows
a temperature icon indicating that the appli-
ance has started the heating phase of the
water in the tub.
7.4: Soil degree icons
• Intensive
• Normal
• Daily
• Light
• Quick
• Super Quick
• Refresh
• Super Refresh
When selecting a programme on the display
appears an icon indicating the degree of soil-
ing automatically proposed by the machine.
7.5: Child safety lock
Lock» paragraph).
7.1
electrolux 7
(see «Child Safety