Recording - JVC HR-P111EE Instructions Manual

Playback features (cont'd)
Rewind power off
When the tape has finished rewinding, the VCR will turn itself
off.
During stop:
Press the Rewind 1 button.
1
2
Press the OPERATE button within 2 seconds.
The STANDBY indicator will blink.
Tracking adjustment
Automatic tracking is adjusted each time a cassette is inserted
in the video cassette player, you may wish to adjust tracking
manually during playback.
Manual tracking
1 Press the remote control's AUTO button.
2
Press the remote control's TRACKING + or – button to
adjust tracking.
7 Press the AUTO button to return to automatic tracking.
Notes:
Tracking may need to be adjusted each time a different video
tape is inserted for playback.
Tracking will be automatically set to the reference position
when the cassette is ejected.

Recording

Use the following procedure to record TV programmes on a
blank video tape.
Before proceeding:
To record TV programmes, the video cassette player must
be connected to the TV as shown in connection B of the
"Connections" section.
Turn on the power of the TV and video cassette player.
Make sure that the video cassette's safety tab is intact. If it
has been removed, cover the hole with adhesive tape.
1
OPERATE STANDBY
SCENE
NTSC
AUDIO SP/LP/EP ON PAL TV FINDER
NTSC3.58
B.E.S.T. LP/EP
PAL NTSC
NTSC4.43
1
Load a blank video tape.
Press the Record ¶ ¶ ¶ ¶ ¶ button to start recording. (On the
2
remote control unit press the Record ¶ ¶ ¶ ¶ ¶ and Play 3 3 3 3 3
buttons at the same time.)
The recording indicator will light during recording.
7 Press the Stop/Eject § button or the remote control's
Stop 7 7 7 7 7 button to stop recording.
To stop recording temporarily:
7 Press the Pause 8 button.
The recording indicator will blink.
Press the Play 3 button to resume recording.
Notes:
To engage recording standby, press the Record ¶ button
and then press the Pause 8 button. The recording indicator
will blink during recording standby. Press the Play 3 button
again to start recording.
If the Record ¶ button does not work, check to see if the
cassette safety tab has been removed.
The player automatically stops when record-standby
continues for more than 5 minutes.
The video tape will be rewound automatically when the end
of the tape is reached.
TV
2
- TVCH + OPERATE
- VOLUME + TV/VIDEO
VIDEO
TV/VIDEO OPERATE
AUTO - TRACKING +
2
B.E.S.T.
( + - + (
[ L J
REMOTE CONTROL UNIT
9