Hitachi CP-D31N User Manual page 36

INPUT menu
Item
COMPUTER IN
FRAME LOCK
(continued on next page)
36
The computer input signal type for the COMPUTER IN1 and IN2
ports can be set.
(1) Use the ▲/▼ cursor buttons to select the COMPUTER IN port to be set.
COMPUTER IN1
(2) Use the ◄/► cursor buttons to select
the computer input signal type.
AUTO SYNC ON G OFF
• Selecting the AUTO mode allows
you to input a sync on G signal or component video from the port.
• In the AUTO mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and select the SYNC ON G OFF, and then
reconnect the signal.
• The COMPUTER IN1/2 port can support a component signal also
10).
(
Set the frame lock function on/off for each port.
(1) Use the ▲/▼ cursor buttons to select the input ports.
(2) Use the ◄/► cursor buttons to
turn the frame lock function on/off.
ON OFF
• This item can be performed only on a signal with a vertical
frequency of 50 to 60 Hz.
• When the ON is selected, moving pictures are displayed more
smoothly.
• This function may cause a certain degradation of the picture. In
such a case, please select the OFF.
Description
COMPUTER IN2