Hitachi CP-D31N User Manual page 33

Item
H POSITION
H PHASE
H SIZE
AUTO ADJUST
EXECUTE
Using the ◄/► cursor buttons adjusts the horizontal position.
Right Left
• Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, please reset the horizontal position to the
default setting. Pressing the RESET button on the remote control when
the H POSITION is selected will reset the H POSITION to the default
setting.
• When this function is performed on a video signal or s-video signal,
the range of this adjustment depends on the OVER SCAN (
setting. It is not possible to adjust when the OVER SCAN is set to 10.
• This item cannot be selected for an HDMI
Using the ◄/► cursor buttons adjusts the horizontal phase to eliminate
flicker.
Right Left
• This item can be selected only for a computer signal or a component
video signal.
Using the ◄/► cursor buttons adjusts the horizontal size.
Small Large
• This item can be selected only for a computer signal.
• When this adjustment is excessive, the picture may not be displayed
correctly. In such a case, please reset the adjustment by pressing the
RESET button on the remote control during this operation.
• Images might appear degraded when this function is operated, but it is
not a malfunction.
Selecting this item performs the automatic adjustment feature.
For a computer signal
The vertical position, the horizontal position and the horizontal phase
will be automatically adjusted.
Make sure that the application window is set to its maximum size prior
to attempting to use this feature. A dark picture may still be incorrectly
adjusted. Use a bright picture when adjusting.
For a video signal and s-video signal
The video format best suited for the respective input signal will be
selected automatically. This function is available only when the AUTO is
selected for the VIDEO FORMAT item in the INPUT menu (
vertical position and horizontal position will be automatically set to the
default.
For a component video signal
The vertical position and horizontal position will be automatically set to
the default. The horizontal phase will be automatically adjusted.
• The automatic adjustment operation requires approx. 10 seconds.
Also please note that it may not function correctly with some input.
• When this function is performed for a video signal, a certain extra such
as a line may appear outside a picture.
• When this function is performed for a computer signal, a black frame
may be displayed on the edge of the screen, depending on the PC
model.
• The items adjusted by this function may vary when the FINE or the
DISABLE is selected for the AUTO ADJUST item of the SERVICE item
in the OPTION menu (
Description
TM
50).
IMAGE menu
32)
signal.
35). The
33