Nokia N95 User Manual page 103

Phone IP address (for IPV4 only) — Enter the IP
●
address of your device.
DNS address — Enter the IP addresses of the
●
primary and secondary DNS servers, if required
by your service provider. Contact your internet
service provider to obtain these addresses.
Proxy server address
●
the proxy server.
Proxy port number — Enter the port number
●
of the proxy server.
WLAN internet access points
Press , and select Tools
Connection Access points
>
or New access point.
Follow the instructions from the WLAN service
provider.
WLAN network name
●
manually or Search for
an existing network, WLAN network mode
WLAN security mode
settings of its access point device.
Network status — Define whether the network
●
name is displayed.
WLAN network mode
●
create an ad hoc network and to allow devices to
send and receive data directly; a WLAN access
point device is not needed. In an ad hoc network,
all devices must use the same
name.
— Enter the address of
Settings
> >
Options Edit
> >
— Select Enter
networks. If you select
and
are determined by the
— Select Ad-hoc to
WLAN network
WLAN security mode
●
used: WEP, 802.1x (not for ad hoc networks), or
WPA/WPA2. If you select
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network
supports them.
To enter the settings for the selected security mode,
select WLAN security settings.
For more information, see the extended user guide
on the product support pages of the Nokia website.
Packet data settings
Press , and select Tools
Connection Packet data.
>
The packet data settings affect all access points
using a packet data connection.
Packet data connection
●
available and you are in a network that supports
packet data, the device registers to the packet
data network. Starting an active packet data
connection (for example, to send and receive e-
mail) is quicker. If there is no packet data
coverage, the device periodically tries to
establish a packet data connection. If you select
When needed, the device uses a packet data
connection only if you start an application or
action that needs it.
— Select the encryption
Open network, no
Settings
> >
— If you select When
103