Hardware Overview - Huawei Turbo Stick E182 Getting Started Manual

Hardware overview

USB Connector
Slider
LED Indicator
USB Connector Connects the Turbo Stick to a PC. Ensure to always
slide in the USB connector while your Turbo Stick is not in use.
Slider Extends or retracts the USB connector.
LED indicator Provides connection status. Refer to Troubleshooting,
on page 14, for a detailed list of the colour and their defined states.
SIM/USIM card slot Holds a Subscriber Identity Module (SIM)/Universal Subscriber
Identity Module (USIM) card which gives you access to the Bell network. Refer to
Inserting your Bell SIM card on page 4.
MicroSD card slot Holds a microSD card which allows you to store up to 32GB
of removable memory. The microSD card is an optional accessory and is not
included within the package.
Your new Turbo Stick must be handled with care to ensure reliable operation. The
following handling guidelines are recommended:
Do not apply adhesive labels to your Turbo Stick; this may cause your Turbo Stick to
overheat and may alter the performance of the antenna.
Do not force the SIM card into the SIM card slot.
The USB connector should plug easily into your computer's Type A USB port. Forcing
your Turbo Stick into a port may damage the connector.
Protect your Turbo Stick from liquids, dust and excessive heat.
Store your Turbo Stick in a a dry and clean environment when not in use.
Do not apply force to the top or bottom of your Turbo Stick.
Remove your Turbo Stick from the USB port before transporting your laptop.
T:5" T:5"
SIM/USIM card slot
MicroSD card slot
11