Pride COLT ES10 Owner's Manual page 31

V I . C O M F O R T A D J U S T M E N T S
SEAT ROTATION ADJUSTMENT
The seat rotation lever will secure the seat into sev-
eral positions.
1. Pull upward on the seat rotation lever to disen-
gage the seat. See figure 17.
2. Rotate the seat to the desired position.
3. Release the lever to secure the seat into place.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to several different
heights. See figure 18.
1. Remove the seat and/or shroud from your
scooter. See VII. "Disassembly and Assembly."
2. Remove the seat height adjustment bolt.
3. Raise or lower the upper seat post to the desired
seat height.
4. While holding the upper seat post at that height,
match up the locating holes in the upper seat post
with those of the lower seat post.
5. Insert the seat height adjustment bolt through the
locating holes of both the upper and lower seat
posts.
6. Reinstall the nut onto the seat height adjustment
bolt and tighten.
7. Reinstall the rear shroud and the seat.
ES 10
Figure 17. Seat Position Adjustments
NUT
LOWER
SEAT POST
Figure 18. Seat Height Adjustment
www.pridemobility.com
SEAT ROTATION LEVER
UPPER SEAT POST
LOCATING HOLE
SEAT HEIGHT
ADJUSTMENT BOLT
31