Programming The Playing Order Of The Chapters-Program Play - JVC TH-A30R Instructions Manual

From the remote control ONLY:
1
Press A–B REPEAT to select the start
point.
"RPT A–" appears on the display and "REPEAT:A–"
appears on the TV screen.
2
Press A–B REPEAT again to select the
end point.
"RPT A–" changes to "RPT A–B" and "REPEAT:A–" changes
to "REPEAT:A–B," then A–B repeat begins.
The unit automatically locates point A and starts repeated
playback between points A and B.
To cancel A–B Repeat
Press A–B REPEAT again.
"RPT OFF" appears on the display and "REPEAT OFF"
appears on the TV screen.
Note:
When the on-screen bar is shown on the TV screen, Repeat mode
indication also changes as follows:
On some DVDs, A–B Repeat may not be used even within the
same title. This is due to their disc structures, and not a
malfunction of the unit.
Programming the Playing Order of the
Chapters—Program Play
You can arrange the chapter playback order before you start playing.
You can program up to 20 steps.
• Before making a program, make sure that the TV is turned on
and the correct input is selected on the TV.
From the remote control ONLY:
1
Load a disc.
• If the current playing source is not the DVD player, press
3/8, then 7 before going to the next step.
2
Press PROGRAM.
The PROGRAM MENU screen appears on the TV
screen.
• "PROGRAM" appears on the display.
PROGRAM MENU
T I T L E CHAPT
1 – – – –
2 – – – –
3 – – – –
4 – – – –
5 – – – –
PREVIOUS
PLAY: 3
A-B REPEAT
A-B REPEAT
A-B REPEAT
PROGRAM
SELECT: ENTER
T I T L E CHAPT
6 – – – –
7 – – – –
8 – – – –
9 – – – –
10 – – – –
NEXT
FINISH: PROGRAM
3
Press ENTER.
SELECT: ENTER
PROGRAM MENU
TITLE CHAPT TITLE CHAPT
1 – – – – 6 – –
2 – – – – 7 – –
3 – – – – 8 – –
4 – – – – 9 – –
5 – – – – 10 – –
CHOOSE : 1–5
PREVIOUS NEXT
PLAY: 3
FINISH: PROGRAM
Title numbers you can select in the next step
4
Press 3 or 2 to select a title
number, then ENTER.
• 3 : Increases the number.
• 2 : Decreases the number.
• You can also select a title number using
the number buttons.
SELECT: ENTER
PROGRAM MENU PROGRAM MENU
T I T L E CHAPT T I T L E CHAPT
1 – 2 – – 6 – –
2 – – – – 7 – –
3 – – – – 8 – –
4 – – – – 9 – –
5 – – – – 10 – –
CHOOSE : 1–9
PREVIOUS NEXT
PLAY: 3
FINISH: PROGRAM
Chapter numbers you can select in the
next step
5
Press 3 or 2 to select a chapter number, then
ENTER.
• 3 : Increases the number.
• 2 : Decreases the number.
• You can also select a chapter number using the number buttons.
PROGRAM MENU
T I T L E CHAPT
1 2 8
2 – – – –
3 – – – –
4 – – – –
5 – – – –
PREVIOUS
PLAY: 3
• To select all chapters in the selected title as one program
step, simply press ENTER without selecting any number.
"ALL" appears on the chapter number position.
6
Repeat steps 3 to 5 to program other chapters
you want.
• After 10 steps are programed, "NEXT «" is selected
(highlighted). If you want to program more steps, press
ENTER.
7
Press 3/8.
The chapters are played in the order you
have programed and the PROGRAM
indicator lights up.
After all the chapters you programed are played back, the
PROGRAM MENU screen appears on the TV screen again.
TO BE CONTINUED ON THE NEXT PAGE
ENTER
– –
– –
– –
– –
– –
ENTER
– –
– –
– –
– –
– –
SELECT: ENTER
T I T L E CHAPT
6 – – – –
7 – – – –
8 – – – –
9 – – – –
10 – – – –
NEXT
FINISH: PROGRAM
TUNER PRESET
31