Programmed Maintenance - Floorpul ruby 45e Use And Maintenance

GB

PROGRAMMED MAINTENANCE

INTERVENTION
RECOVERY TANK CLEANING
SUCTION FILTER CLEANING
SOLUTION TANK FILTER CLEANING
BRUSHES CLEANING
BRUSHES DISASSEMBLY
SQUEEGEE CLEANING
FRONT SQUEEGEE RUBBER REPLACEMENT
REAR SQUEEGEE RUBBER REPLACEMENT
SPLASH GUARD RUBBER REPLACEMENT
SQUEEGEE ADJUSTMENT CHECK
SQUEEGEE HOSE CLEANING
SOLUTION TANK CLEANING
BRUSHES MOTOR CHECK
SUCTION MOTOR CHECK
BRUSHES BASE GROUP CHECK
SCREW TIGHTENING
RECOMMENDED BRUSHES
Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristles diameter are the elements that distinguish different types of brushes.
MATERIAL
PPL (Polypropylene)
NYLON
TYNEX
BRISTLES THICKNESS
PAD HOLDER
MACHINE CODE
ruby 45e 48901010
48901020
48901030
48901040
48901050
48901060
48801010
ruby 55e 48901110
48901120
48901130
48901140
48901150
48901160
48901170
48801020
ruby 50e 48902010
48902020
48902030
48902040
48802010
CHARACTERISTICS
Good wear resistance. Maintains characteristics with hot water up to 60°C. It is not hygroscopic.
Excellent wear resistance, even with hot water over 60°C. It is hygroscopic. It looses its physical characteristics over the
time.
Nylon bristles with grains of abrasive material. Use with caution in order not to mark the floor or ruin the polishing.
Thicker bristles are more rigid and must be used on smooth floor or floor with small joints.
On irregular floors with deep joints or relieves, it is recommended to use softer bristles which penetrate more easily and
deeper. Please be aware that when brushes bristles are worn out and therefore too small, they become rigid and unable
to penetrate and clean deeper. This may also happen with thicker bristles creating brush vibration.
Pad holder is recommended to clean smooth surfaces. It has anchor points which permit the blocking of the abrasive pad
during work.
QUANTITY DESCRIPTION
2 Brush PPL 0,3 Ø 235
2 Brush PPL 0,4 Ø 235
2 Brush PPL 0,5 Ø 235
2 Brush NYLON 0,5 Ø 235
2 Brush PPL 0,6 Ø 235
2 Brush TYNEX Ø 235
2 Pad holder Ø 230
2 Brush PPL 0,3 Ø 285
2 Brush PPL 0,4 Ø 285
2 Brush PPL 0,5 Ø 285
2 Brush NYLON 0,5 Ø 285
2 Brush PPL 0,6 Ø 285
2 Brush TYNEX Ø 285
2 Brush PPL 0,9 Ø 285
2 Pad holder Ø 280
1 Brush PPL 0,3 Ø 508
1 Brush PPL 0,7 Ø 508
1 Brush PPL 0,9 Ø 508
1 Brush TYNEX Ø 508
1 Pad holder Ø 495
DAILY WEEKLY
•
•
•
•
•
•
•
•
•
•
USE
Irregular floors with large joints.
Normal floors.
Smooth floors with small joints and persistent dirt.
Smooth floors with small joints and persistent dirt.
Smooth floors with small joints and persistent dirt.
Floors of resistant material and particularly dirty.
For pads of 9", for smooth surfaces cleaning.
Irregular floors with large joints.
Normal floors.
Smooth floors with small joints and persistent dirt.
Smooth floors with small joints and persistent dirt.
Smooth floors with small joints and persistent dirt.
Floors of resistant material and particularly dirty.
Smooth floors with small joints and persistent dirt.
For pads of 11", for smooth surfaces cleaning.
Irregular floors with large joints.
Smooth floors with small joints and persistent dirt.
Smooth floors with small joints and persistent dirt.
Floors of resistant material and particularly dirty.
For pads of 20", for smooth surfaces cleaning.
22
TWO-MONTHLY SIX-MONTHLY
•
•
•
•
•
•
GB