OSD Position Adjustment (DISP)
1. Input a color-bar signal.
2. Set to Service Adjustment Mode.
3. Select DISP with
and
4. Adjust with
and
for adjustment of characters to center.
5. Write the memory by pressing
OP
0
DISP
Rotation Coil Adjustment
1. Input a monoscope signal.
2. Push the Menu button on the Remote.
3. Select the "Set-up" mode.
4. Select "Tilt Correction". Confirm that number (0) color
changes to red.
5. Push
(+) on the Remote. Confirm that the number
increases up to +5 and the picture rotates clockwise.
6. Push
(-) on the Remote. Confirm that the number
decreases down to -5 and the picture rotates counter-
clockwise.
7. Push
(+) on the Remote. Return the value to 0.
Set-Up
.
then
.
SERVICE
16
TV
—
—
29
KV-36FS12/36FS16/36FV16/36FV26