Philips Q528.1E Service Manual page 38

EN 38 5. Q528.1E LA
• 1.4 Display_DISPT_x.x.x.x.zip. Not to be used by Service
technicians.
• 1.5 EDID_Q581X_x.x.x.x.zip. Contains the EDID content
of the different EDID NVM's. See ComPair for further
instructions.
For sets with three HDMI connectors.
- For HDMI 1 NVM, use "*port 1*.bin
- For HDMI 2 NVM, use "*port 2*.bin
- For HDMI 3 NVM, use "*port 3*.bin
• 1.6 EJTAGDownload_Q581X_x.x.x.x.zip. Only used by
service centra which are allowed to do component level
repair.
• 1.7 Factory_Q581X_x.x.x.x_commercial.zip. Only for
production purposes, not to be used by Service
technicians.
• 1.8 FlashUtils_Q581X_x.x.x.x_commercial.zip. Not to
be used by Service technicians.
• 1.9 FUS_Q581X_x.x.x.x_commercial.zip. Contains the
"autorun.upg" which is needed to upgrade the TV main
software and the software download application.
• 2.0 MOP_IACXX_x.x.x.x.zip. Not to be used by Service
technicians. A programmed MOP device can be ordered
via your regional Service organization.
• 2.1 OpenSourceFile_Q581X_x.x.x.x.zip. Not to be used
by Service technicians.
• 2.2 Pacific3_P3FW0_x.x.x.x.zip. Not to be used by
Service technicians. A programmed PACIFIC device can
be ordered via your regional Service organization.
• 2.3 PQPrivate_U5207_x.x.x.x.zip. Not to be used by
Service technicians.
• 2.4 PQPublic_U5207_x.x.x.x.zip. Not to be used by
Service technicians.
• 2.5 ProcessNVM_Q531X_x.x.x.x.zip. Default NVM
content. Must be programmed via ComPair.
• 2.6 StandbySW_CFTxx_x.x.x.x_commercial.zip.
Contains the Stand-by software in "upg" and "hex" format.
- The "StandbySW_xxxxx_prod.upg" file can be used to
upgrade the Stand-by software via USB.
- The "StandbySW_xxxxx.hex" file can be used to upgrade
the Stand-by software via ComPair.
-The files "StandbySW_xxxxx_exhex.hex" and
"StandbySW_xxxxx_dev.upg" may not be used by Service
technicians (only for development purposes).
• 2.7 UpgradeAll_Q531X_x.x.x.x_commercial.zip. Only
for production purposes, not to be used by Service
technicians.
Caution : Never try to use this file, because it will
overwrite the HDCP keys ! ! !
Service Modes, Error Codes, and Fault Finding