Square Jellyfish Jelly Legs micro tripod User Manual

Thank you for purchasing the Square Jellyfish Jelly Legs Micro Tripod.
This product is designed to hold pocket cameras weighing up to 9 ounces
that have tripod screw mounts. Jelly Legs will also support smartphones
and phablets when using one of the Square Jellyfish Tripod Mounts. Add
a Square Jellyfish Micro Ball Head for maximum photo angle flexibility.
it couldn't be easier
To use your Jelly Legs Micro Tripod, simply attach the folded tripod to any
device that accepts a ¼ x 20 standard camera thread screw. Once attached,
unfold the legs to their full position. Confirm that the set-screw is tightened
and place your camera and Jelly Legs on a level surface of your choosing. The
rubber-tipped legs help hold your tripod securely in place.
set-screw
Use common sense
• The Jelly Legs Micro Tripod is designed to hold the camera steady while
taking a picture. It is not designed to be mounted to a moving object
or vehicle.
• Do not place your camera and Jelly Legs Micro Tripod where they can easily
fall a distance that would cause damage to your camera. A small railing and
the edge of a cliff are just a few examples that come to mind.
• This product contains small parts that may be a choking hazard. Keep out
of reach of children.
Jelly legs micro tripod User's manUal
Alternatively, the legs of the tripod
may be individually adjusted
in a range of angles. Using a
screwdriver, slightly loosen the
set-screw and adjust each leg
as desired. Then re-tighten the
set-screw and place your camera
and Jelly Legs on a level surface.
Check to make certain your
camera is well balanced; if not,
adjust the legs as necessary.
www.squarejellyfish.com
Designed in USA. Made in China. Patents pending.
Jelly legs with
micro Ball Head and
spring tripod mount
Jelly legs with Universal
smartphone tripod mount
Jelly legs
with pocket camera